Quality Fleet Service

Specifications

• 2024 Manitou Group Construction Telehandlers MT 930 HA
• Year2024
• ManufacturerManitou Group
• Model NameConstruction Telehandlers
• Trim NameMT 930 HA
• Generic Type (Primary)General
• Enginenorm: Stage V | Model: V3307-CR-TE58
• Engine ManufacturerKubota
• Cylinder Liners4 - 203 in³
• Engine Power75 Hp / 54.60 kW
• Engine Torque, Maximum265 Nm @ 1400 rpm
• Drivetrain
• Steering2 wheel steer, 4 wheel steer, Crab mode
• TransmissionType: Hydrostatic | Max. travel speed: 15 mi/h
• GearsNumber of gears (forward / reverse): 2 / 2
• Brakes
• Brake System TypeService: Hydraulic
• Wheels & Tires
• Tires, Rear SpecificationALLIANCE 380/75 R20 148A8 A580
• Tires, Front SpecificationALLIANCE 380/75 R20 148A8 A580
• Operational
• Operating ConditionsBreakout force with bucket: 3427 daN | Lifting: 10.24 s | Lowering: 7.95 s | Extension: 9.89 s | Crowd: 3.06 s | Dump: 2.44 s | Drawbar pull (Laden): 3860 daN | Vibration on hands/arms: < 2.50 m/s²
• Performance
• Noise LevelNoise at driving position (LpA): 74 dB | Noise to environment (LwA): 103 dB
• Hydraulics
• Pump TypeGear pump
• Hydraulic Flow88 l/min
• Maximum Pressure3553 PSI
• Lights and Safety
• Safety FeaturesSafety cab homologation: Cabin ROPS - FOPS Level 2
• DimensionsMax. outreach: 19 ft 10 in | Tilt-down angle 116 ° | Tilt-up angle 11 ° | Forks section: 2 in
• Lift HeightMax: 29 ft
• Overall Lengthto carriage: 15 ft 4 in | (with forks): 18 ft 11 in
• Ground Clearance1 ft 2 in
• Wheelbase8 ft 10 in
• Lengthto face of forks: 27 ft 6 in | Forks: 42 in
• Overall Width6 ft 6 in | cab: 2 ft 7 in
• Overall Height6 ft 6 in
• Turning RadiusExternal turning radius (over tyres): 10 ft 11 in
• WidthForks: 4 in
• Capacities
• Cargo CapacityMax: 6614 lb
• Oil capacityEngine oil: 3 US gal | Hydraulic oil: 30 US gal
• Fuel Capacity24 US gal
• Weights
• WeightUnladen: 14330 lb