2024 Liebherr Piling rig LRH series LRH 200

Information

2024 Liebherr Piling rig LRH series LRH 200

The combined piling and drilling rig LRH 200 has especially flexible leader kinematics that enable very high radii and inclinations of up to 18° in all directions. A flexible in-house hammer concept allows for the use of tamper weights with varying weights. Therefore, concrete, steel or timber piles can be optimally installed. The new LRH 200 offers a further range of applications: When configured as a drilling rig, a high-performance drilling drive provides the necessary torque for the common single pass methods such as continuous flight auger, full displacement and down-the-hole drilling processes. The machine can also be used for soil mixing. The compact machine is based on the proven LB 30 basic machine from Liebherr’s range of drilling rigs. The compact rig can be transported in one piece with the leader mounted and is consequently ready for operation on the jobsite in a short time.

Features may include:

Special radii and inclination
  • The flexible leader kinematics allows very large radii of up to 8 m and inclinations of up to 18° in all directions. Thus, a complete pile group can be installed from one location without repositioning the carrier machine.
13-metre vertical travel device
  • The special leader kinematics allow the leader to be raised or lowered by 6.5 m above/below ground level.
Easy transportation and quick set-up
  • Basic machine and leader can be transported in one piece with all hydraulic hoses connected. The minimized assembly work allows for quick and easy transportation of the machine between jobsites.
Safe access
  • Side platform, railings and ladders are fully integrated in the new machine design and no longer need to be removed for transport.
High operator comfort
  • The innovative cabin design includes a modern air-conditioning system and an optimized view from the cabin, as well as an orthopaedic operator’s seat. All switches, joysticks and pedals are ergonomically positioned.
Powerful drive technology
  • The Liebherr-own and fuel efficient diesel engine generates the required power. In combination with the on-board hydraulics a sufficient amount of performance for various deep foundation works is provided. When using further attachments like casing oscillators, no additional power pack is needed.

Photos

Highlights

  • South Hadley, Massachusetts
  • 2024
  • Liebherr
  • Piling rig LRH series LRH 200
  • Available
  • Max: 96 ft (29.2 m)

Specifications

  • 2024
  • Liebherr
  • Piling rig LRH series
  • LRH 200
  • Track
  • 335 hp (250 kW)
  • 250 kNm | Predrilling: 35 kNm
  • Conventional (diesel engine)
  • Max. winch line pull: 44,961.789 lbf (200 kN) | Max. crowd force: 44,961.789 lbf (200 kN)
  • Vertical travel device: 6,5 ft (6,5 m) | Continuous flight auger drilling, max. drilling diameter: 3.3 ft (1,000 mm) | Soil mixing, max. mixing diameter: 4,921.2 ft (1,500 mm) | Full displacement drilling, max. drilling diameter: 500 mm
  • Max: 96 ft (29.2 m)
  • Max. leader: 84 ft (25.7 m) | Max. pile: 80.4 ft (24.5 m) | Jib: 25.6 ft (7.8 m) | Soil mixing, max. effective: 112.5 ft (34.3 m)
  • Predrilling, max. drilling: 57.1 ft (17.4 m) | Continuous flight auger drilling: 113.2 ft (34.5 m) | Down-the-hole drilling, max. drilling: 82.7 ft (25.2 m) | Full displacement drilling: 35.2 m
  • Min: 11.45 ft (3,490 mm)
  • Min: 11.15 ft (3,400 mm)
  • Operating: 89.3 tons (81.0 t)
  • Max. pile: 35,274 lbs (16 t) | Basic hammer min/max: 14,859 lb (6,740 kg) / 39,683 lb (18,000 kg) | Ram mass min/max: 6,613.800 lb (3,000 kg) / 22,046 lb (10,000 kg)
  • Leader inclination: 1:3